Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
PK 30002-K High Performance
The PK 30002 K unites robust and reliable technology with uncompromising High Performance equipment. Equipped with Power Link Plus, it guarantees maximum manoeuvrability. Its short, weight-optimized boom system gives it an ideal performance weight. Its compact construction, short parking length, and exceptional hook height make it the ideal crane for a wide range of duties.
Brochures
PK 30002 K
| Max. lifting moment | 27.3 |
| Max. lifting capacity | 6800 |
| Max. hydraulic outreach | 12.6 |
| Slewing angle | 400° |
| Slewing torque | 3.2 |
| Stabilizer spread (std) | 5.6 m |
| Fitting space required (std) | 0.92 |
| Width folded | 2.53 |
| Max. operating pressure | 320 |
| Pump capacity | 55 - 80 l/min |
| Dead weight (std.) | 2790 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
 Lifting moment |  Outreach |  Slewing angle |  Slewing torque (mt) |  Pressure |  Pump capacity (l/min) |  Crane Weight |  Crane Height |  Crane Width |  Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 27.4 mt | 8.2 m | 400 | 3.2 | 32.0 Mpa | 55-80 | 2790 kg | 2350 mm | 2525 mm | 915 mm | 8010.01 mm | 6800 kg | 3400 kg |
| B | 26.9 mt | 10.4 m | 400 | 3.2 | 32.0 Mpa | 55-80 | 2955 kg | 2350 mm | 2525 mm | 915 mm | 10230.01 mm | 6600 kg | 2550 kg |
| C | 26.5 mt | 12.6 m | 400 | 3.2 | 32.0 Mpa | 55-80 | 3099 kg | 2350 mm | 2525 mm | 980 mm | 12460.01 mm | 6350 kg | 2000 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
